|
Duramax T4 Turbo Pedestal
This cast iron T4 flange turbocharger pedestal will allow you to mount any T4 turbo on any model year Duramax engine.
$439.95
Usually ships in
1-2 Days
Average Rating:
 
|
|
|
LLY/LBZ/LMM Duramax Cheetah Turbocharger
Cheetah Turbocharger featuring a 64mm compressor wheel and high flow turbine wheel. Upgrade to the 68mm inducer for 262.00! Completely stock appearing and requires no installation kit. Comes with new drain gaskets.
250.00 Refundable core charge is not included in price but will be refunded when your "GOOD" turbocharger core is recieved.
$2,100.00
Usually ships in
1-2 Weeks
Average Rating:
|
|
|
Fleece Performance Billet S475
Fleece Performance S475 with 87mm turbine and new 6 bladed Billet Compressor and Race Cover
$2,597.50
Usually ships in
3-5 Days
Average Rating:
|
|
|
Diamond Eye Turbo Direct Pipe
04-07.5 GM Turbo Direct Pipe foy LLY & LBZ. The Turbo Direct Pipe is mandrel bent and heat wrapped to decrease EGT's.
$303.45
Usually ships in
1-2 Days
Average Rating:
|
|
|
|
Fleece Performance Duramax Turbo Installation Kit
This kit has all you need to install our turbo on your Duramax.
Comes with a remote turbo feed line to ensure your turbo gets plenty of oil pressure, factory oil port plug, turbo feed flange, turbo drain pipe and gakets, pedestal studs, and a turbo coolant delete plug.
$240.92
Usually ships in
1-2 Days
Average Rating:
|
|
|
|
Duramax T3 Turbo Pedestal
This cast iron T4 flange turbocharger pedestal will allow you to mount any T4 turbo on any model year Duramax engine.
$439.95
Usually ships in
1-2 Days
Average Rating:
|
|
|
63mm LB7 Cheetah Turbocharger
Wake up your 2001-2004 LB7 with FPE's drop in replacement LB7 Cheetah Turbocharger. Featuring an FPE Custom 63mm Billet compressor wheel and high flow inconel turbine wheel.
$2,147.50
Usually ships in
3-5 Days
Average Rating:
|
|
|
Holset 351 63mm Cheetah Turbocharger
The 351 Cheetah is a stock appearing, drop in replacement turbo. It features a Custom FPE Billet 63mm Compressor and a High Flow 65mm Turbine wheel. Originally offered for the 2003-2007 5.9 model year, this charger can be custom built to work in place of any HX, HY, or HE series Holset Turbocharger.
$1,847.50
Usually ships in
1-2 Days
Average Rating:
|
|
|
LB7 Intake Air Heater Delete Plug
Fleece Performance intake air heater delete, for LB7 Duramax pickup trucks. Featuring an 1/8th NPT tapped hole in the top for easy access to boost or a good location to add water/meth or nitrous oxide injection.
$35.75
Usually ships in
1-2 Days
Average Rating:
|
|
|
Duramax Turbo Thermostat Block off Plug (Turbo Coolant Feed)
Installing a non water cooled turbo charger on your Duramax, and dont know what to do with the stock coolant feed line? Delete it at the thermostat with this FPE Billet Aluminum block off plug! Engineered with an O-Ring seal to prevent leaks and gain extra clearance for large 5" intake plumbing. CNC machined from 6061-T6 Aluminum.
$35.95
Usually ships in
1-2 Days
Average Rating:
|
|
|
FPE Billet S363/68 Turbocharger
Fit your Cummins, Duramax, or Powerstroke with the Ultimate towing "Workstock" turbo charger. The FPE Billet S363/68 Features a FPE custom 63mm Billet Compressor wheel, a quick spooling 68mm turbine wheel fitted in a high flow T4 turbine housing. Capable of supporting 650RWHP, the FPE Billet S363 has been described as feeling "electric" in its throttle response; regardless of load, throttle position, speed, or gear. EGTs never get out of check thanks to the high flow Borg Warner T4 turbine housing. Cast compressor variations are also available starting at $1497.50.
$1,997.50
Usually ships in
3-5 Days
Average Rating:
|
|
|
MBRP Stock Replacement LB7 Downpipe
Increase the potential of your stock turboed LB7 Duramax with MBRPs Drop in Replacement high flow downpipe. Gain better throttle response, quicker spool up, and cooler EGTs. Makes a great addition to the FPE LB7 Cheetah Turbocharger.
$314.99
Usually ships in
1-2 Days
Average Rating:
|
|
|
Steed Speed T4 Manifold
CNC Machined, the Steed Speed Cummins Exhaust manifold is one of the highest quality manifolds on the market. Available in T3, T4, or VGT flange, with a 2nd generation mounting location. The Turbine Flange can be made at the standard 2nd Gen angle or at 90 degrees. Steed Speed Manifolds can be built with a 44mm v-band wastegate port as well. Pricing starts at $650
$650.00
Usually ships in
3-5 Days
Average Rating:
|
|
|
Cummins Turbo Installation Kit
Fleece Performance Offers a Cummins Turbo Installation kit that offers all of the nescessary parts for your 2nd Gen Manifold swap. The kit includes:
-Oil Drain tube
-Oil Feed Fitting, which will allow you to utilize your stock oil feed
-Oil Drain Gasket
-Oil Drain Bolts
-Turbine Flange Studs with Nuts
-T4 Turbine Flange Gasket
$146.75
Usually ships in
1-2 Days
Average Rating:
|
|
|
Steed Speed VGT Manifold
Upgrade your 6.7L Cummins with a 2nd Gen mounting location for your stock VGT turbo, or retro-fit a Holset VGT turbo on any 6B Series Cummins with the Steed Speed VGT Manifold! Built with universal port designs for both the 12v and 24v heads, and available in the HE351 or HE451 flange designs, this manifold is the ultimate solution for your Holset VGT retro-fit project.
$750.00
Usually ships in
3-5 Days
Average Rating:
|
|