All Lights On (ALO) Troubleshooting Tips
The installation of your All Lights On® from Fleece Performance Engineering should be easy to complete in about 10 minutes. In the event that you run into some problems, our team has some great tips get your truck illuminating the road ahead!
The All Lights On® module will fit a range of vehicles listed here that are equipped with factory-installed fog lights.
If you experience problems with the operation of the All Lights On®, try these tips:
1) Verify the proper pins have been selected on the proper connector of the Body Control Module or Lighting Control Module. Recount pin locations as identified in the instructions. DO NOT go by wire color, as this can vary across models and applications.
2) Confirm you have properly seated the connector cover with a pair of pliers. The insulation displacement type of connector that is utilized must pierce the wire sheathing and make contact with the copper wire. If the wire sheathing is not properly pierced, a connection can not be made.
3) Test operation with the engine running. Not all models of vehicles will provide power to the fog lamps in the accessory position.
IMPORTANT: We will not be shipping product between the dates of July 5th and July 11th. All orders will be processed and shipped the week of July 12th.
While we are closed take advantage of 5% off MSRP!