NEED HELP? Chat with us or call (317) 286-3573 · 8am to 6pm ET

PowerFlo® Lift Pump for 2011-2024 Dodge Ram Cummins

$829.00
In stock
SKU
FPE-34562
Paypal options offered at checkout

The PowerFlo lift pump is the latest OEM replacement performance lift pump from the diesel experts at Fleece Performance.  The PowerFlo is the only in-tank lift pump capable of supporting up to 800 hp!

Features

Direct OEM In-Tank Replacement:

The PowerFlo Lift Pump retains the factory water-in-fuel sensor, factory fuel heater, factory fuel lines, and installs in less than half the time of other high flow lift pumps. 

OEM Quality - Dual Gerotor: 

Two is always better than one, and the PowerFlo delivers with two OEM quality gerotor pumps, increasing flow capacity and increased reliability over the factory pump. Capable of supporting up to 800 hp, including dual CP3 pump configurations. 

Seamless Integration:

The active fill bucket eliminates the need for tank sumps, draw straws, additional air filtration, and the ¼ tank issues typically encountered when seeking a higher flow lift pump to meet your engine’s need. 

Aftermarket Capable: 

Want the benefits of the in-tank pump but need to run your own fuel lines or aftermarket filters?  The pump outlet and return is threaded to accept a -8 O-ring fitting (3/4"-16 thread). 

 

Cross-Reference

 
 Year  FPE Part Number       Replaces Dodge/Ram OE Part Number     
 2005-2009       FPE-34560  RL143160AB, 5143160AA, 5143160AB, 68002062AB, 68003465AA
 2010  FPE-34561  68084965AB
 2011-2024  FPE-34562  5145571AB, 5145571AA, 5145625AA

 

Application Notes

  • Operating Pressure: 18-20 psi at idle
  • For MY 2020 and up; this pump will not work with the factory installed 50-gallon fuel tank option.
  • Not for use with cab & chassis applications
  • PowerFlo lift pumps are validated for use with up to 20% biodiesel. 

Upgrading to a TITAN Fuel Tank?

Your PowerFlo is a direct fit in TITAN Fuel Tanks' extra-capacity, mid-ship replacement tanks. TITAN tanks are built to use the truck's stock sending unit location, so the PowerFlo installs in a TITAN tank just like it does in the factory tank – same factory fuel lines, water-in-fuel sensor, and fuel heater, with no sumps or draw straws required.

Built from heavy-duty cross-linked polyethylene, TITAN tanks are made in the USA, carry a lifetime warranty, and bolt in with no cutting or fabrication. Pair them with a PowerFlo for more range and the fuel supply to support it.

Find your TITAN tank:

Model Year Cab / Bed TITAN P/N Usable Capacity Locking Ring
2011-2012 Crew Cab / Long Bed 7030303 60 gal No*
2011-2012 Crew Cab / Short Bed 7030210 56 gal No*
2013-2024 Crew or Quad Cab / Long Bed 7030313 55 gal Yes
2013-2024 Crew Cab / Short Bed (4x4 only) 7030113 52 gal Yes
2013-2024 Mega Cab / Short Bed 7030213 50 gal Yes

*Units without a locking ring may require trimming of the mounting stud(s) for clearance.

 

Fitment notes:

  • For 2500 and 3500 pickups with the 6.7L Cummins. Not for cab and chassis models.
  • Not for trucks ordered from the factory with the optional 48/50-gallon fuel tank.
  • The 2013-2024 Crew Cab short bed tank fits 4x4 trucks only.

View the full Fleece and TITAN fitment chart (PDF)

Shop TITAN Ram Tanks →

 

Protected under US Trademark Reg. No. 6,878,860

 

Prop 65 WarningWARNING: Cancer & Reproductive Harm - P65Warnings.ca.gov

New Products

© 2026 Fleece Performance Engineering, Inc. All Rights Reserved.